Model PUMA180
The Andishe Negar Energy Company (ANECO) was founded in 2010 with the goals of building energy, as the company’s managers with 20 years of experience and experience in the construction of petrochemical plants and other energy derivatives have been involved.
information about puma180
| Cylinders | 6 / Equipped with Turbo Charge and Inter-Cooler |
| Capacity (liters) | 6/7 |
| Engine power (kw / hp) | 134/182 |
| Engine power with power management system | 238/ 175 |
| Maximum engine speed (rpm) | 2200 |
| Maximum torque (Nm / rpm) | 844 / 1400 |
| Maximum torque (Nm / rpm) power with power management system | 938 / 1600 |
| Fuel tank capacity (liters) | 410 |
| 18 × 6 Full Power shift 40 kph | |
| Rear differential lock | Multi-disc with multi-disc wet with control |
| management system | |
| Braking | Hydraulic brake with several self-regulating wet discs |
| 4WD system and steering | |
| Type | Electrohydraulic type with power management system |
| Steering angle | 55 ◦ |
| Minimum radius of rotation (m) | 6.1 |
| Type | Electrohydraulic type with automatic control |
| Standard speed (rpm) | 540E/1000 or 540/1000 |
| Engine speed standard (rpm) | 1569/1893 or 1893/1950 |
| Shaft type | 21 splines / 6 splines |
| Maximum pump flow (liters per minute) | 120 |
| Load capacity (kg) | 8647 |
| Maximum number of remote control valves Standard / Multi-controller | 4-pair mechanical or 4-pair electronic – Ability to increase up to 5 pairs |
| Category | Cat. III |
| Hydraulic pump flow (L /minute) | 42 |
| Maximum lifting capacity (kg) | 2460 |
| Hydraulic valves | 4 number (2 pairs) |
| Minimum weight (kg) | 6850 |
| Permissible total weight (kg) | 13000 |
| A: Total length (mm) | 4916 |
| B: Total height (mm) | 3040 |
| C: Total width (mm) (including rear fenders plus 155 mm) | 2682 |
| D: Wheelbase (mm) | 2884 |
| F: Center to center of front tires (mm) | 1552 – 2269 |
| Center to center of rear tires (mm) | 2438 – 1524 |